RESEARCH CONCEPTS RC3000 Bedienungsanleitung PDF herunterladen (Seite 5)

RC3000 Antenna Controller Appendix B-Mount Specific Data B-5

2.2.13 Resolver inputs

J11 and J7 are used for the azimuth and elevation resolver interfaces.

AZ COS +

AZ COS -

AZ SIN +

AZ SIN -

AZ REF +

AZ REF -

EL COS +

EL COS -

EL SIN +

EL SIN -

EL REF +

EL REF -

AZIMUTH

RESOLVER

ELEVATIO

RESOLVER

Shield

J11

DB-15

rc3ke_resolver.dwg

2.2.5 Signal Strength

NOTE: The gain and offset potentiometers associated with the signal strength connector are recessed

from the backpanel on the RC3000E model. The lid of the RC3000 will have to be removed in order to

calibrate these pots. This connector is designated J2 on the 3000E backpanel.

2.2.6 Navigation Sensors

On “baseline” RC3000’s the J9 connector is a 37 pin connector. An adapter “dongle” is supplied that

adapts the DB-37 to two DB-9 connectors.

The RC3000E model supplies the two DB-9 connectors (J4-GPS, J5-Fluxgate) directly on the backpanel.

Pinouts for these DB-9s are as shown in the baseline manual.

2.2.8 RF Autopeak Designated as J1 for RC3000E.

2.2.11 PC Remote Control Designated as J3 for RC3000E.

These connectors are provided on the backpanel of the RC3000E. Their function is as described in the

baseline manual.

1 2 3 4 5 6 7 8 9 10 ... 18 19

Keine Kommentare

RESEARCH CONCEPTS RC3000 Bedienungsanleitung Seite 5